Paraben's LockDown v3lockdown.gif 

Using a write blocker gives you an added layer of protection

Paraben's Lockdown v3 is an advanced write-blocker that combines speed and portability to allow IDE and SATA media to be acquired quickly and safely. Paraben has partnered with Tableau to bring you the T35es Forensic Bridge Kit (Paraben's LockDown v3) that brings you fast, reliable SATA and IDE write block protection in one unit. Paraben's LockDown recognizes and defeats HPA (Host Protected Area) or DCO (Device Configuration Overlay) regions. With the Paraben's LockDown v3 in your forensic toolkit, you'll have a robust and reliable forensic bridge with three different host interface connections (FireWire 800, FireWire 400, and USB) and two device-side connections (SATA and IDE).

What's in the LockDown v3 Kit

•One Tableau T35es eSATA Forensic Bridge
•One 8 inch red SATA signal flat cable
•One 8 inch IDE Cable
•One SATA 15-pin to Female Molex Cable
•One Female to Female Molex Power Cable
•One P9 to P9 FireWire Cable
•One P9 to P4 FireWire Cable Adapter
•One P9 to P6 FireWire Cable Adapter
•One Mini Type B to USB Cable
•One External Power Supply and power cable
•Soft Side storage bag
Paraben's LockDown Specs:

Connectors: Host Side
  eSATA
 One eSATA
 FireWire
 Two 9-pin FireWire800 (1394B)
 FireWire
 One 6-pin FireWire400 (1394A)
 USB
 One USB Mini-B (5 pin, USB2.0 high/full/low speed)
 DC Input
 DC In A: 4-pin male "drive power" connector
DC In B: 5-pin Mini-DIN connector for use with Tableau TP2 power supply


Connectors: Device Side
  SATA
 SATA Signal Connector
 IDE
 IDE Signal Connector
 DC Output
 4-pin male "drive power" connector (power to SATA or IDE hard disk)

Switches
 DC Input Select
 Selects between DC In A and DC In B Sources
(functions as source ON/OFF when one DC In source connected)
 DIP Switch
 4-position DIP switch selects field-configurable options
(DIP Switches can be accessed by removing a knock-out panel on the side of the T35e case) 

Other Features
 
Status LEDs
 8 LEDs: DC IN A good, DC In B good, Power ON, IDE drive detected, SATA drive detected, Host connected, Write-block enabled, Drive activity
 
Factory Configuration
 Black Paraben case units are configured as read-only (model T35e

Other Features
Status LEDs
 8 LEDs: DC IN A good, DC In B good, Power ON, IDE drive detected, SATA drive detected, Host connected, Write-block enabled, Drive activity
 
Factory Configuration
 Black Paraben case units are configured as read-only (model T35e


Compatibility
  SATA Devices
 SATA 1 or SATA 2 hard disk devices
 IDE Devices
 Parallel ATA hard disk devices with LBA (Logical Block Addressing) support
 Host Interface
 FireWire800/400 or USB 2.0
 Host O/S
 Windows XP/2000/newer, Macintosh OS X, most Linux distributions (note: Linux distributions have varying levels and quality of support for FireWire 1394 A/B and USB2.0)

Physical / Environmental
  Power
 3.5 watts typical operating (not including hard disk)
 Supply voltage (DC IN A/B)
 +5VDC @ 2A, +12VDC @ 2A (includes budget for hard disk)
 Output voltage (DC OUT)
 +5VDC @ 1A, +12VDC @ 1A
 Dimensions
 5.75 in. (L) x 3.25 in. (W) x 1.125 in. (H)
 Weight
 5.4oz (153g)
 Operating temperature range
 0 to 55 degrees C (no airflow)
 Storage temperature range
 -40 to 70 degrees C
 Relative humidity
 Up to 90% (non-condensing)

Warranty
 One years parts and workmanship from date of purchase