ultrablock_small.gif

The UltraBlock SCSI is used to acquire data from a SCSI hard drive in a forensically sound write-protected environment.

 UltraBlock SCSI Kit
SKU: W2300

 

 

 

 

UltraBlock SCSIT4_small.gif

The UltraBlock SCSI is a FireWire/USB to SCSI Bridge Board with Forensic Write Protection. The UltraBlock SCSI can be connected to your laptop or desktop using the FireWire-A (400 Mb/s), the FireWire-B (800 Mb/s) or the USB 1.X/2.0 interface. Like the UltraBlock IDE and the UltraBlock SATA, the UltraBlock SCSI is provided with write protection enabled by default but is user configurable for Read-Only or Read-Write Operation.
 
 PC Interface:
 FireWire-A, FireWire-B, USB (1.X/2.0)
 Drive Interface:
 SCSI-3 (HPDB68 Interface)
 User Configurable:
 Read-Only or Read-Write
 

Optional adapters are available for SCSI-1, SCSI-2 and SCA devices. The cost is $20 for each adapter, or purchase the entire set in our SCSI Adapter Kit for

 Versatile Operation

In Write Protect mode, the UltraBlock will prevent ANY and ALL writes from reaching the attached device. It is compatible with all Windows 98se, Windows ME, Windows 2K/XP, and any O/S that supports IEEE 1394 and has a compliant card and drivers.

In Read/Write mode (non-Write Protected), it can be used to attach a drive to be used for receiving images on your FireWire chain.

The UltraBlock is shipped by default in a Read-Only (write blocking) configuration. However, it can be configured to enable Read-Write operation as well. To prevent unwanted alteration it necessary for the customer to make a modification to the housing to enable the Read-Write operation.ultrablock_switches_S.gif

 SWITCH 1
OFF = Read Only (write blocking enabled)
ON = Read/Write
 SWITCH 2
OFF = Unit reports errors if writes are attempted
ON = Unit suppresses errors if writes are attempted
 SWITCH 3
OFF = Unit reports Write-Protect (WP) status in code page
ON = Unit supresses Write-Protect (WP) status in code page
 SWITCH 4
Reserved
 

NotesTP1_small.gif

 The UltraBlock Power Supply may only be used to power one UltraBlock and one Hard Drive. Do not attempt to use a single external power supply to power more than one UltraBlock and Hard Drive.

This UltraBlock Kit includes the UltraBlock Device, UltraBlock Power Supply, 9-pin to 9-pin FireWire-B (800) cable, USB cable, one drive power cable, one 9-6 pin Firewire adapter, one 9-4 pin Firewire adapter and one SCSI drive data cable.
 

Additional FireWire-A (400), FireWire-B (800), and USB Cables are available from Digital Intelligence as required for your application.

The UltraBlock family of write blockers is also available in a complete forensic kit available on the UltraKit page.

The UltraKit and complete UltraBlock family are available exclusively from Digital Intelligence!