sas_write_blocker_small.gif

ULTRABLOCK SAS WRITE BLOCKER
The UltraBlock Forensic SAS bridge brings secure, hardware-based write blocking to the world of Serial Attached SCSI hard drives. The UltraBlock SAS Write Blocker supports SAS hard drives that are commonly found in RAID arrays, and becoming more popular in desktop systems. Switchable power is controlled through a reliable, membrane ON/OFF switch. 
 UltraBlock SAS Write Blocker
             SKU: W2900


About the UltraBlock SAS Write Blockersas_write_blocker_side_small.gif

The UltraBlock SAS is an eSATA/FireWire/USB to SAS Bridge with Forensic Write Protection. It can be connected to your laptop or desktop using the eSATA, FireWire-A (400 Mb/s), the FireWire-B (800 Mb/s), or the USB 1.X/2.0 interface. The UltraBlock SAS is provided with write protection enabled by default. By connecting a suspect drive to the UltraBlock SAS, you can be certain that no writes, modifications, or alterations can occur to the attached drive.

The UltraBlock SAS Bridge is the first portable hardware write blocker built specifically for
fast imaging of SAS hard drives. One cable (the TC4-8 Unitized Power & Signal) connects the T6es to a
SAS hard drive. The flexiblity of four unique host computer connections provide options for any data
acquisition job you face.

The UltraBlock SAS kit includes the following:

UltraBlock Forensic SAS Bridge
Power Supply
Unified SAS Power & Signal Cable
FireWire800 9-pin to 9-pin Cable
4-pin to 9-pin FireWire Cable Adapter
6-pin to 9-pin FireWire Cable Adapter
USB-A to Mini-USB-B Cable
eSATA Cable, 1 Meter length
Nylon kit bag 
 PC Interface:
 eSATA, FireWire-A, FireWire-B, USB (1.X/2.0)
 Drive Interfaces:
 Serial Attached SCSI (SAS)
 User Configurable:
 Read-Only or Read-Write
 

NotesTP1_small.gif

 The UltraBlock Power Supply may only be used to power one UltraBlock and one Hard Drive. Do not attempt to use a single external power supply to power more than one UltraBlock and Hard Drive.

This UltraBlock Kit includes the UltraBlock Device, UltraBlock Power Supply, eSATA cable, 9-pin to 9-pin FireWire-B (800) cable, USB cable, one drive power cable, one 9-6 pin Firewire adapter, one 9-4 pin Firewire adapter and Unified SAS Power & Signal Cable.